金屬橡膠減振器隨機振動有限元仿真

2016-11-01 by:CAE仿真在線來源:互聯網

金屬橡膠減振器隨機振動有限元仿真

鄒廣平;劉;澤;劉;松;程賀章

哈爾濱工程大學,哈爾濱,150001

摘要:提出一種金屬橡膠減振器隨機振動有限元仿真方法,采用正交各向異性阻尼材料模擬金屬橡膠材料。相關仿真參數由金屬橡膠減振器正弦掃頻試驗確定。對金屬橡膠減振器進行正弦掃頻試驗和隨機振動試驗,利用有限元仿真軟件ANSYS Workbench對金屬橡膠減振器隨機振動進行有限元仿真模擬,并將仿真結果與試驗結果進行對比分析。研究結果表明,所提出的有限元仿真方法能夠很好地對金屬橡膠減振器隨機振動進行仿真,且計算結果具有較高精度。

關鍵詞: 金屬橡膠減振器, 隨機振動, 有限元仿真, 正交各向異性阻尼材料

Finite Element Simulation of Metal Rubber Damper Random Vibration

Zou Guangping;Liu Ze;Liu Song;Cheng Hezhang

Harbin Engineering University,Harbin,150001

Abstract:A finite element simulation method of random vibration for metal rubber damper was put forward. The orthotropic anisotropy damping material was used to simulate metal rubber, and the related simulation parameters were determined through the sine sweep experiments of the metal rubber damper. The finite element simulation of metal rubber damper random vibration was done via ANSYS Workbench. Simulation results was compared with the experimental ones. Results show that the proposed finite element simulation method can well simulate metal rubber damper random vibration and the calculation results with high accuracy.

Key words: metal rubber damper;random vibration;finite element simulation; orthotropic anisotropy damping material

鏈接本文:http://www.cmemo.org.cn/CN/Y2016/V27/I14/1960

開放分享：優質有限元技術文章,助你自學成才